RAM 1500 2022 Owner's Manual page 226

224 STARTING AND OPERATING
Seven-Pin Connector
1 — Backup Lamps
2 — Running Lamps
3 — Left Stop/Turn
4 — Ground
5 — Battery
6 — Right Stop/Turn
7 — Electric Brakes
Trailer Light Check
This feature will run the trailer lights through a
sequence to check the trailer light function. It is
available in the Instrument Cluster under the
Trailer Tow menu Ú page 121.
When activated the feature will enable all of the
exterior lights sequentially for up to five minutes
for time to walk around and verify functionality. The
following exterior lights will remain on for the
entirety of the sequence:
Park/Running Lamps

Side Marker Lamps (if equipped)

License Lamp

Signature Lamp (if equipped)

Low Beams

Fog Lamps (if equipped)

Daytime Running Lamps

During this time the following lights will sequence,
each activating for three seconds:
1. Brake and CHMSL (third brake light)
2. Left turn signal
3. Right turn signal
4. Reverse Lamps
5. High Beam
This light check sequence will continue for a total
of five minutes.
The sequence will only activate if the following
conditions are met:
Vehicle is equipped with the Trailer Tow

Package
Vehicle is in PARK

Vehicle is not in motion

Ignition is in ACC or ON/RUN

Remote start is inactive

Brakes are not applied

Left turn signal is not applied

Right turn signal is not applied

Hazard switch is not applied

The sequence will cancel if any of the following
conditions occur:
Brakes are applied

Vehicle is shifted from PARK

Vehicle is no longer stationary

Left turn signal activated from stalk

Right turn signal is activated from stalk

Hazard switch is activated

Any button on the key fob is pushed

Ignition button is pushed

High Beam stalk position is changed

Sequence is canceled in the instrument cluster
