RAM 1500 2022 Owner's Manual page 123

Trailer Tow — If Equipped
Push and release the up or down
button until the Trailer Tow menu item is
highlighted in the instrument cluster display. Push
and release the right or left arrow button to
cycle through the following trailer tow information:
Trip (trailer specific) Distance: Push and hold

the OK button to reset the distance.
Integrated Trailer Brake Module (ITBM):

Braking Output

Trailer Type

ITBM Gain

Trailer Light Check: Push and hold the OK

button to begin the Trailer Light Test sequence
Ú page 223.
Trailer Tire Pressure Monitoring: The Instrument

Cluster Display will display the Trailer Tire Pres-
sure for a connected trailer with sensors that
match the active trailer profile. When a low tire
is present, the low tire value will be displayed in
red, and the affected low tire will have a red
glow. "Trailer Tire Low" will be displayed on the
center bottom of the Instrument Cluster Display
screen.
Audio
arrow Push and release the up
button until the Audio Menu icon/title is
highlighted in the instrument cluster display. This
menu will display the audio source information,
including the Song name, Artist name, and audio
source with an accompanying graphic.
Phone Call Status
When a call is incoming, a Phone Call Status
pop-up will display on the screen. The pop-up will
remain until the phone is answered or ignored.
NOTE:
The call status will temporarily replace the
previous media source information displayed on
the screen. When the pop-up is no longer
displayed, the display will return to the last used
screen.
Stored Messages
Push and release the up
button until the Messages Menu item is
highlighted. This feature shows the number of
stored warning messages. Push and release the
right or left arrow button to cycle through
stored messages.
GETTING TO KNOW YOUR INSTRUMENT PANEL
Settings
Head-Up Display (HUD) – If Equipped
or down arrow
NOTE:
The HUD feature Settings are available at any
vehicle speed Ú page 122.
Screen Setup Driver Selectable Items
Push and release the up
button until the Settings Menu Icon/Title is
highlighted in the instrument cluster display. Push
and release the OK button to enter the submenus
and follow the prompts on the screen as needed.
The Settings feature allows you to change what
information is displayed in the instrument cluster
as well as the location that information is
displayed.
NOTE:
The Settings feature is only available when the
vehicle speed is less than 5 mph.
or down arrow
121
3
or down arrow