Table of Contents
Advertisement
EVENT REPORTING & CONTROL BY TELEPHONE AND SMS
E. To Program the Acknowledge Method
18.
Voice<- ->private
or
Tel. acknowledge
19.
by single ack ◼
20.
or
by all ack
21.
single ack ◼
☺
Return to step 19
SMS REPORT
A. To Program Events to be Reported by SMS
1.
PRIVATE REPORT
2.
VOICE REPORT
3.
SMS REPORT
4.
REPORTED EVENTS
disable report ◼
5.
or
alarms
6.
alarms ◼
☺
Return to step 4
B. To Program SMS Telephone Numbers
7.
REPORTED EVENTS
or
8.
2nd SMS tel#
◼080168593
9.
10.
8032759333
☺
Return to step 8
38
Click the
or
and press
to confirm.
The display shows the currently selected option.
Click the
or
acknowledge method, for example, "by all ack".
☺
A "Success Tune"
method and returns to step 19.
Enter the [USER SETTINGS] menu, select the [PRIVATE REPORT] option
1
and press
.
When the display reads [VOICE REPORTS] press
The display will read [SMS REPORT]. To enter this option, press
When the display reads [REPORTED EVENTS] press
The display shows the currently selected option.
Click the
or
you wish to be reported via SMS, for example, [alarms].
When you are satisfied with the setting, press
☺
A "Success Tune"
reported, and returns to step 4.
Click the
or
number you wish to program or edit, for example, "2nd SMS tel#", and press
.
To program or edit the phone number, at the blinking cursor position enter
the SMS phone number, for example, "5080168593", using the numerical
6, 7
keypad.
When done, press
☺
A "Success Tune"
8, 15
and returns to step 8.
button until the display reads [Tel. acknowledge]
12
button until the display reads the desired
sounds. The display confirms the set acknowledge
5, 15
button until the display reads the event group
sounds. The display confirms the set events to be
5, 15
button until the display reads the SMS phone
to confirm.
sounds, the display confirms the SMS phone number
D-307502 PowerMaster-10/30 G2 User's Guide
11
.
.
.
4
to confirm.
Advertisement
Table of Contents
Need help?
Do you have a question about the PM-10 TRIPLE and is the answer not in the manual?
Questions and answers
the orange light will not go off even though system working ok
The orange light on the Visonic PM-10 TRIPLE indicates a trouble condition. To resolve this, review the trouble messages displayed on the panel. Possible issues could include a low battery in a device, an inactive device, or a failed communication attempt. Follow the steps to identify and correct the specific trouble source:
1. Press the button repeatedly to view each trouble message.
2. Address the indicated issues, such as replacing low batteries or reactivating inactive devices.
Once all troubles are resolved, the orange light should turn off.
This answer is automatically generated