Enabling / Disabling Auto-Arming; Setting The Auto-Arming Time - Visonic PM-10 TRIPLE User Manual

EVENT REPORTING & CONTROL BY TELEPHONE AND SMS
B.10 Enabling / Disabling Auto-Arming
The PowerMaster system can be programmed to automatically arm itself on a daily basis at a predetermined
time. This feature is useful especially in commercial applications, such as in stores, to ensure that the system is
always armed and without having to assign security codes to employees.
 Here you can enable (activate) and disable (stop) the Auto-Arming. To set the Auto-Arming time –
see section B.11.
 Auto-arming can arm a "NOT READY" system only if forced arming is enabled by the installer while
programming your system.

Carefully read the section titled "Additional Information" according to the indicated references
table at end of this section.
1.
AUTO-ARM ENABLE
enable autoarm◼
2.
or
disable autoarm
3.
☺

Return to step 1
B.11 Setting the Auto-Arming Time
 Here you can program the exact time of the Auto-Arming.
Note:
This feature is not to be not to be enabled in UL Listed product.
1.
AUTO-ARM TIME
2.
arm time 12:00P
3.
TIME 08:30A
☺

Return to step 1
For detailed instructions on how to select User Settings – refer to sections A.1 and A.2.
1
2
The display shows the current setting (indicated by a
now select either to enable or disable auto-arming using the
◼
3
The symbol now appears next to the newly selected option.
4
The display shows the current setting of the Auto-Arm Time, for example, "
blinking on the first hour digit "1". For detailed explanation of how to set the time - refer to SectionB.8 B.
5
The saved auto arm time is displayed without the cursor, for example, "
6
You can now select another option in the User Settings menu (see section A.1 and section A.2), or quit
programming (see section A.3).
D-307502 PowerMaster-10/30 G2 User's Guide
Enter the [USER SETTINGS] menu, select the [AUTO-ARM ENABLE] option
and press
The display shows the currently selected setting.
Click the
setting, for example, [disable autoarm] and press
A "Success Tune" 
then returns to the User Settings menu, step 1.
Enter the [USER SETTINGS] menu, select the [AUTO-ARM TIME] option
and press
The display shows the current setting of the Auto-Arm Time. At the blinking
cursor position, enter the correct time, for example, "8:30A", using the
numerical keypad.
When you are satisfied with the setting, press
A "Success Tune" 
returns to the User Settings menu, step 1.
Additional Information (section B.10 - section B.11)
1
.
or button until the display reads the desired
☺
sounds. The display confirms the saved setting, and
1
.
4
☺
sounds. The display confirms the saved time, then
◼
symbol), for example, [
or
08:30 A
etc – see
1
2
to confirm.
3
to confirm.
5, 6
enable autoarm
]. You can
button.
12:00 PM
", with the cursor
".
35