Table of Contents
Advertisement
Cisco ONS 15540 Components
Figure 1-16 Processor Card
CONSOLE PORT
Processor Card LEDs
Table 1-8
Processor Card LEDs
LED
Status
Status
Red
Orange
Green
Active
Green
Standby
Green
Slot 0
Green
Slot 1
Green
NME
Full Duplex
Green
Off
Cisco ONS 15540 ESP Hardware Installation Guide
1-18
temperature. (See
Figure
range condition, the processor card activates an alarm. See
for fan assembly status.
Processor cards manage communication functions for the system. The cards
monitor all modules in the chassis and determine the state of the system. Each
module determines its state from feedback at various system monitoring points.
The processor generates clocking to all the modules and some additional
components in the system.
Table 1-8
lists the LEDs on the processor card faceplate, their default conditions,
and what the conditions indicate.
card LEDs.
Description
A board reset or initial power on.
System initialization.
Full initialization and operational.
This board is the primary processor and is running IOS software.
This board is the secondary processor.
Flash PC Card is present.
Flash PC Card is present.
Full duplex is running.
Half duplex is running.
1-16.) During a fan failure or an out-of-temperature
Figure 1-17
and
Chapter 1
Product Overview
Table 2-1 on page 2-26
Figure 1-18
show the processor
78-15095-01
Advertisement
Table of Contents
