Table of Contents
Advertisement
Appendix A
Specifications
Transponder Specifications
Note
78-15095-01
Table A-2
lists the specifications for the line card motherboards and transponder
modules supported on the Cisco ONS 15540. On the client side, the Cisco ONS
15540 has an output (laser) power in the range of 4 to 8 dBm and a receive (detector)
sensitivity of -32 dBm. Cisco ONS 15540 systems can be deployed in a point-to-point
link over a maximum distance of 100 km.
For more information about optical power budgets and network planning, refer to
the
Cisco ONS 15540 ESP Planning and Design
Table A-2
lists the specifications for the Cisco ONS 15540 transponder module.
Table A-2
Transponder Specifications
Description
2.5-Gbps Line Card Motherboard
Dimensions
10-Gbps Line Card Motherboard
Dimensions
2.5-Gbps Transponder Modules
Dimensions
10-GE Transponder Modules
Dimensions
ITU Direct Insertion Modules
Dimensions
Max Insertion Rate
For optical backplane and transponder
module connectors
Client Side Ports Single-Mode
Data rate
Guide.
Specification
18 x 9 in (45.7 x 22.9 cm)
1.3 x 9.1 x18.1 in (3.30 x 23.1 x 46 cm)
3 x 7.5 in (7.6 x 19.1 cm)
1.3 x 7.6 x 6.4 in (3.30 x 19.3 x
16.26 cm)
1.3 x 7.6 x 3.1 in (3.30 x 19.3 x
7.87 cm)
200 times
100 times starts degradation
16 Mbps to 2.5 Gbps
Cisco ONS 15540 ESP Hardware Installation Guide
Transponder Specifications
A-3
Advertisement
Table of Contents
