Table of Contents
Advertisement
4-Position Gold Power Supply Plugs (Quantity 5)
NI 9979 Strain Relief for 4-Position Power Connector
Related Information
POWER LED Indicators
SD Card Removable Storage
The cRIO-9035 provides an SD card slot that can read from and write to NI-approved SD
cards.
Caution
locations.
Caution
the area is known to be nonhazardous.
Note
Using SD cards that are not approved by NI might invalidate specifications
and result in unreliable performance.
The following accessories are available for the SD card slot.
SD Industrial Storage Card
SD Door (x3)
Related Information
File System
on page 21
SD Card Slot Cover
You must use the SD card slot cover to protect the SD card in hazardous locations. Do not
remove an SD card while either LED is flashing or lit because file corruption may result.
Note
Screw the slot cover closed completely. Tighten the captive screws to a
maximum torque of 0.75 N · m (6.7 lb · in.) using a #1 Phillips screwdriver. Do not
overtighten.
RS-232 Serial Port
The cRIO-9035 has an RS-232 serial port that is implemented with an RJ-50, 10-position
modular jack to which you can connect devices such as displays or input devices. Use the
Table 5. Power Accessories (Continued)
Accessory
on page 17
You must use the SD card slot cover to protect the SD card in hazardous
Do not insert or remove SD cards unless power has been switched off or
Table 6. cRIO-9035 SD Storage Accessories
SD Card
Capacity
16 GB
32 GB
—
NI cRIO-9035 User Manual | © National Instruments | 9
Part Number
783529-01
196939-01
Part Number
783658-01
783659-01
783660-01
Advertisement
Table of Contents
