Mounting The Crio-9035 On A Din Rail - National Instruments NI cRIO-9035 User Manual

Mounting the cRIO-9035 on a DIN Rail

You can use the NI DIN rail mounting kit to mount the cRIO-9035 on a standard 35-mm DIN
rail.
What to Use
• cRIO-9035
• Screwdriver, Phillips #2
• NI DIN rail mounting kit, 157254-01
– DIN rail clip
– M4 × 10 screws (x3)
What to Do
Complete the following steps to mount the cRIO-9035 on a DIN rail.
1
2
1. Align the cRIO-9035 and the DIN rail clip.
2. Fasten the DIN rail kit to the cRIO-9035 using the screwdriver and M4 × 10 screws.
Tighten the screws to a maximum torque of 1.3 N · m (11.5 lb · in.).
You must use the screws provided with the NI DIN rail kit because they are the correct
depth and thread for the DIN rail clip.
Clipping the cRIO-9035 on a DIN Rail
Complete the following steps to clip the cRIO-9035 on a DIN rail.
30 | ni.com | NI cRIO-9035 User Manual