Timer Operation: Setting The Tempering Time - Binder BD 53 Operating Manual

6.3.3 Timer operation: Setting the tempering time

1. Press the time management button
2. If necessary, switch to timer operation by button
The display alternately shows"t1" and the running-down time or "tOff":
or
3. Set the desired time [hh.mm] with buttons
4. Wait 2 seconds until the entered temperature value is taken over (display flashing once).
The display alternately shows "t1" and the set time now running down.
The time directly begins to run off after taking-over of the entered value. Heating and fan (with FD) are
active until the timer has run-down.
5. Press button to return to normal display (actual value display) (automatically after approx. 30
seconds).
The actual temperature value is displayed (example: 22 °C):
The controller operates with the entered set-points (chap. 6.1) until run-down of the set time. Heating and
fan (with FD) are active until the timer has run-down.
To know the remaining timer time or, if appropriate, to modify it, press the time management button
in normal display (actual value display).
The display alternately shows "t1" and the running-down time:
After the set time has run down the display alternately shows the actual temperature value (example: 22
°C) and "tOff":
Now the heating and fan (with FD) are inactive.
BD / ED / FD (E2) 03/2019
. The controller indicates its current time function.
.
Remaining time (example: 28 minutes) – Timer
running down
Timer not programmed or run-off "t off"
.
page 22/68