Switching Between "Continuous Operation" And "Timer Operation; Continuous Operation - Binder BD 53 Operating Manual

6.3.1 Switching between "Continuous operation" and "Timer operation"

Press the time management button
The controller displays the actual time function. In time function "Continuous operation", "t1" and "t inf" are
displayed alternately. In time function "Timer operation", "t1" is displayed alternately with the running-
down time or "tOff".
If in time function "Timer operation" the Timer is just running off ("t1"displayed alternately with the running-
down time) the timer must first be set to Zero (chap. 6.3.3). Now "t1" is displayed alternately with "tOff",
and the controller can be changed to time function "Continuous operation".

Continuous operation

2 seconds 2 seconds
Timer operation
Press button to return to normal display / actual value display (automatically after approx. 30 sec).
6.3.2 Continuous operation
1. Press the time management button
2. If necessary, switch to timer operation by button
The display shows alternately "t1" and the time function "Continuous operation" "t inf":
3. Press button to return to normal display (actual value display) (automatically after approx. 30
seconds).
The actual temperature value (example: 22 °C) is displayed:
Now the controller operates with the entered set-point (chap. 6.1) in continuous operation. The heating
and fan (for FD) are permanently active, independent of the timer setting.
To cancel Continuous operation, proceed accordingly:
1. Press the time management button
2. Switch to Timer operation by pressing down button
BD / ED / FD (E2) 03/2019
.
Timer not programmed or run-down
.The timer indicates its current time function.
.
.
for 2 seconds (chap. 6.3.1).
page 21/68