Adjusting The Volume Of The Radio From Bluetooth Audio Device; Viewing And Clearing The Bluetooth Device Information - Motorola APX 900 3 User Manual

English
b. or to Bluetooth spkr and press the
Menu Select button directly below Off.
The display shows Off.
c. To return to the Home screen, press the Menu
Select button directly below Exit.
• Turning off the Bluetooth audio using the
preprogrammed button:
a. To route the audio routing from the headset to the
radio, press the preprogrammed button.
You hear a short, medium-pitched tone. The
display shows Speaker on.
Adjusting the Volume of the Radio from
Bluetooth Audio Device
Ensure that the Bluetooth audio device is connected to the
radio.
Your radio can only control the volume of OCW Bluetooth
enabled audio device. If the radio is paired with other
Bluetooth enabled audio device, its volume is independent
154
from the APX radio. In this case, the volume is only
adjustable on the device.
Adjust volume up/down on the Bluetooth audio
device.
The radio display shows Volume XX, and you hear
a short, medium-pitched tone.
Viewing and Clearing the Bluetooth
Device Information
1
or to BT. Press the Menu Select button directly
below BT to access the Bluetooth feature screen.
2 or to Devices.
Once the display highlights the Devices, the display
shows XX connected alternates with XX paired.
3 Press the Menu Select button directly below Sel.
4 If there are devices being paired or connected,
or along the list of <Device Friendly Name> to
see the status of each device.
Send Feedback