Table of Contents
Advertisement
English
Pairing the Authentication PIN by
Manually Keying in the Same PIN
Follow the procedure in
Searching and Pairing the
Bluetooth Device on page 147
Bluetooth devices. Start pairing with the Authentication PIN
by following the steps described next.
1
or
to the required device. Press the Menu
Select button directly below Sel to initiate pairing.
Your radio only supports HSP, DUN, PAN and SPP
Bluetooth profiles.
If successful, the display shows Pairing in
progress... followed by a request for PIN number. A
blinking cursor appears below the Enter PIN:.
If unsuccessful, the display shows BT profiles not
supported. The display returns to Available Dev
screen.
2 Use the keypad to enter the PIN. Press
one space to the left. Press
the right. Press the Menu Select button directly
below Del to delete.
152
to search for available
to move
to move one space to
3 Press Ok to continue pairing the radio and the
device. Enter the same PIN number on the device.
The pairing process can be canceled by pressing the
Menu Select button below Cncl.
If successful, the display shows Pairing in
progress,<Device Friendly Name> paired,
Connecting in progress... followed by <Device
Friendly Name>connected. The display returns to
the Bluetooth feature screen.
If unsuccessful, one of the following scenarios will
occur:
•
The display shows <Device Friendly Name>
PIN auth fail (if the PIN numbers are different).
•
<Device Friendly Name> connect failed (if the
connection fails).
The display returns to Available Dev screen.
Send Feedback
Advertisement
Table of Contents
