Alert Tones - Motorola APX 900 3 User Manual

English
NOTICE:
No LED indication when the radio receives a clear
(non-secured) transmission in trunking Mode. LED

Alert Tones

Your radio uses alert tones to inform you of the condition of your radio. The following table lists these tones and when
they occur.
You Hear Tone Name
Short, Low- Radio Self Test Fail
Pitched Tone
Reject
Time-Out Timer Warning
No ACK Received
Individual Call Warning
Tone
Long, Low- Time-Out Timer Timed Out
Pitched Tone
Talk Prohibit/PTT Inhibit
Lack of Voice PTT Time
out
54
indication can be preprogramed by qualified
technician to be permanently disabled. Consult your
dealer for further details if you want to disable it.
Heard
When radio fails its power-up self test.
When an unauthorized request is made.
Four seconds before time out.
When radio fails to receive an acknowledgment.
When radio is in an individual call for greater than six seconds
without any activity.
After time out.
(When PTT button is pressed) transmissions are not allowed.
When the radio ends your call after it detected there are lack of
voice for five seconds after the PTT is pressed and hold. Your ra-
dio ends the call to enable your radio to receive calls from other
radio users.
Table continued...
Send Feedback