Table of Contents
Advertisement
English
to pair before initiating the pairing. Authentic PIN is used for
the verification.
NOTICE:
The pairing PIN authentication method is only
applicable for Bluetooth version 2.1 and above.
Pairing the Authentication PIN when
Receiving a Pairing Request
1 When the radio display shows <Device Friendly
Name> pair request, perform one of the following
actions:
•
To accept, press the Menu Select button below
Ok.
•
To reject, press the Menu Select button below
Cncl.
Your radio only supports HSP, DUN, PAN, and SPP
Bluetooth profiles.
When the pairing timer expires, the display shows
<Device Friendly Name> pair canceled and return
to Home screen.
If you choose to accept the pairing process, the
display shows Compare PIN: XXXXXX.
150
If you choose to reject the pairing process, the
display shows Cancel pairing in progress...
followed by <Device Friendly Name> pair
canceled and return to Home screen.
2 Perform one of the following actions when the
display shows Compare PIN: XXXXXX.:
•
Press the Menu Select button below Ok if the
PIN is correct.
•
Press the Menu Select button below Cncl to
reject if the PIN number is incorrect. The display
shows Cancel pairing in progress... followed by
<Device Friendly Name> pair canceled and
return to Home screen.
When the PIN authentication timer expires, the
display shows <Device Friendly Name>pair
canceled and return to Home screen.
If successful, the display shows Pairing in
progress...., <Device Friendly Name> paired
followed by <Device Friendly Name>connected.
If unsuccessful, one of the following scenarios will
occur:
Send Feedback
Advertisement
Table of Contents
