English
Selecting or Changing the ARS Mode
The following methods are options on how to select or
change the ARS Mode. The result of all the methods is the
same. You can use the options interchangeably depending
on your preference and the programmed functions.
•
Selecting or Changing the ARS mode using the 16-
Position Select knob:
a. Once the zone you want is displayed, turn the
preprogrammed 16-Position Select knob to the
desired mode.
•
Selecting or Changing the ARS mode using the radio
menu:
a.
or
to Chan.
b. Press the Menu Select button directly below
Chan.
The display shows the current channel name.
c.
or
to the required channel or mode.
One of the following scenarios occur:
•
In ARS Server Mode, the display shows the
zone and ARS server channel.
102
•
In ARS Non-Server Mode, the display shows
the zone and ARS non-server channel.
•
If the channel or mode selected is
unprogrammed, the display shows
Unprogrammed. Repeat this step.
d. Press Sel to confirm the displayed channel.
User Login Feature
This feature allows you as the user to be associated with
the radio. With this association, every data application
(Example: Text Messaging Service) takes on a friendly
username.
You can still send text messages without logging in as a
user. The user login feature only enables the recipient of
your message to identify you as the sender by assigning a
username to your message.
NOTICE:
A predefined username that is set more than the
maximum allowed characters is an invalid name.
Send Feedback