Saving A Channel In The Dynamic Zone From Channel Name; Deleting A Channel In The Dynamic Zone - Motorola APX 900 3 User Manual

5 or to the required channel. Press the Menu
Select button directly below Sel.
The display shows Channel updated.
6 Press the Back button to return to Home screen.
Saving a Channel in the Dynamic Zone
from Channel Name
The radio must be in Dynamic Zone in order to perform this
operation.
1
or to ZnPr then press the Menu Select button
directly below ZnPr to enter Program Zone screen.
2 Press the Menu Select button directly below Edit.
The display shows Search Options screen.
3 or to Channel Name then press the Menu
Select button directly below Sel.
The display shows a blinking cursor on the Channel
Name screen.
Send Feedback
4 Use the keypad to type or edit the channel name.
5 Press the Menu Select button directly below Srch
once the entry is done to initiate searching.
You can cancel this operation at this step by
pressing the Back button to return to Search
Options screen.
The display shows Searching.... Once found, the
display shows Channel updated.
If the radio is triggered to search for an empty entry,
the display shows Invalid entry.
If the entry does not match, the display shows
Channel name not found. Repeat from
step 5 to search again.
6 Press
to return to the Home screen.

Deleting a Channel in the Dynamic Zone

The radio must be in Dynamic Zone in order to perform this
operation.
English
step 4 or
79