Table of Contents
Advertisement
Making a Talkgroup Call
To make a call to a group of users, your radio must be
configured as part of that talkgroup.
1 Turn the 16-Position Select Channel Knob to
select the channel with the desired talkgroup.
2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm)
from your mouth.
3 Press the PTT button to make the call.
The radio shows different indicators based on the
system the radio is configured.
•
For ASTRO Conventional system, the LED lights
up solid red. The display shows the talkgroup
alias or ID.
•
For Trunking system, the LED lights up solid red.
4 Speak clearly into the microphone.
5 Release the PTT button to listen.
Send Feedback
Making a Private Call (Trunking Only)
Your radio must be preprogrammed for you to use this
feature.
This feature allows you to send an individual Call Alert or
page if there is no answer from the target radio.
1
or
to Call, and press the Menu Select button
directly below Call.
The display shows the last transmitted or received
ID.
2 To select the required ID, perform one of the
following actions:
•
Press the Menu Select button directly below
Cnts to scroll through and select the required ID.
•
Press the Menu Select button directly below
LNum to go to the last number dialed.
•
or
to the required ID.
•
Use the keypad to enter the required ID.
English
67
Advertisement
Table of Contents
