Ametek AMREL SPS Series Operation Manual page 14

FRONT PANEL AND REMOTE DIGITAL PROGRAMMING
Voltage
Current
Overvoltage Protection (OVP)
REMOTE DIGITAL READBACK
Voltage
Current
REMOTE ANALOG PROGRAMMING
Constant Voltage
Constant Current
Overvoltage Protection (OVP)
REMOTE ANALOG READBACK
Voltage
Current
RESISTIVE
Constant Voltage (0-100%)
Constant Current (0-100%)
VOLTAGE
Constant Voltage (0-100%)
Constant Current (0-100%)
Overvoltage Protection (OVP) (5–110%)
REMOTE SENSING
REMOTE ANALOG CONTROL
Input to Output Isolation
DIMENSION
WIDTH
DEPTH
HEIGHT
WEIGHT
Important Notes:
1) Specifications are subject to change without notice
2) The SPS Series power supplies are intended for indoor use only.
±0.1% of full-scale output
±0.4% of full-scale output
±1% of full-scale output
±0.15% of full-scale output
±0.4% of full-scale output
±0.25% of full-scale output for 0-5V range (±0.5% 0-10V range)
±0.8% of full-scale output
±1% of full-scale output
±1% of full-scale output, 0-10V range
±1% of full-scale output, 0-10V range
0–5 k
0–5 k
0–5 VDC or 0–10 VDC
0–5 VDC or 0–10 VDC
0.25–5.5 VDC
Terminals are provided to regulate output voltage at point of load. Maximum
line drop 5% of rated output voltage per line for 40-100V models, 2% of rated
output voltage per line for >100V models.
The control signal return for Non-Isolated Analog programming is connected to
the negative output terminal. Under no condition should the negative terminal
exceed 300V to earth ground. The maximum voltage from control signal return
of the Remote Isolated Analog programming (option) to the negative output
terminal is 600V.
3U MODELS
19.00 in (48.3 cm)
25.46 in (64.7 cm)
5.25 in (13.3 cm)
(5kW) ≈ 40 lbs (18 kg)
(10kW) ≈ 60 lbs (27 kg)
(15kW) ≈ 80 lbs (36 kg)
6U MODELS
19.00 in (48.3 cm)
25.12 in (63.8 cm)
10.5 in (26.7 cm)
(20 KW) ≈ 120 lbs (54 kg)
(25 kW) ≈ 140 lbs (64 kg)
(30kW) ≈ 160 lbs (73 kg)
4 | P a g e