Step 3: Fix Outdoor Unit; Step 4: Install Wiring - Beko BBVHO 090 User Manual

10 Outdoor unit installation

10.3 Step 3: Fix outdoor unit

3.1 According to the outdoor unit installation
dimensions to mark the installation position
for expansion bolts.
3.2 Drill holes and clean the concrete dust and
place the bolts.
3.3 If applicable install 4 rubber blankets on the
hole before place the outdoor unit (Optional).
This will reduce vibrations and noise.
3.4 Place the outdoor unit base on the bolts and
pre-drilled holes.
3.5 Use wrench to fix the outdoor unit firmly with
bolts.
Install 4 rubber blankets (Optional)
46 / 120 EN
C

10.4 Step 4: Install wiring

4.1 Use a phillips screwdriver to unscrew wiring
cover, grasp and press it down gently to take
it down.
4.2 Unscrew the cable clamp and take it down.
4.3 According to the wiring diagram pasted
inside the wiring cover; connect the
connecting wires to the corresponding
terminals, and ensure all connections are
firmly and securely
4.4 Reinstall the cable clamp and wiring cover.
C
Terminal block
Cable clamp
Wiring cover
Split type air conditioner / User Manual
Note:
The outdoor unit can be fixed on a
wall-mounting braclet. Follow the
instruction of the wall-mounting
bracket to fix the wall-mounting
bracket on the wall, and then
fasten the outdoor unit on it and
keep it horizontal.
The wall-mounting bracket must
be able to support at least 4 times
of the weight of outdoor unit.
Note:
When connecting the wires
of indoor and outdoor units, the
power should be cut off.
Wiring diagram