Table of Contents
Advertisement
10
Outdoor unit installation
10.1 Step 1: Select installation
location
Select a site that allows for the following:
1.1 Do not install the outdoor unit near sources
of heat, steam or flammable gas.
1.2 Do not install the unit in too windy or dusty
places.
1.3 Do not install the unit where people often
pass. Select a place where the air discharge
and operating sound will not disturb the
neighbors.
10.2 Step 2: Install drainage
hose
2.1 This step only for heating pump models.
2.2 Insert the drainage joint to the hole at the
bottom of the outdoor unit.
2.3 Connect the drainage hose to the joint and
make the connection well enough.
Split type air conditioner / User Manual
Over 30 cm/12in.
Over 200 cm/79in.
1.4 Avoid installing the unit where it will be
exposed to direct sunlight (otherwise use
a protection, if necessary, that should not
interfere with the air flow).
1.5 Reserve the spaces as shown in the picture
for the air to circulate freely.
1.6 Install the outdoor unit in a safe and solid
place.
1.7 If the outdoor unit is subject to vibration,
place rubber blankets onto the feet of the
unit.
Over 50 cm/20in.
Drainage joint
Drainage hose
45 / 120 EN
Advertisement
Chapters
Table of Contents
