Remote Control; Cooling Mode; Fan Mode (Not Fan Button); Dry Mode - Beko BBVHO 090 User Manual

4

Remote control

4.1

Cooling mode

The cooling function allows the air
COOL
conditioner to cool the room and
reduce Air humidity at the same
time.
To activate the cooling function (COOL), press the
button until the symbol
MODE
the display.
With the button or set a temperature lower
than that of the room.
4.2

Fan mode (not fan button)

FAN Fan mode, air ventilation only.
To set the FAN mode, press
appears on the display.
4.3

Dry mode

This function reduces the humidity
DRY
of the air to make the room more
comfortable.
To set the DRY mode, Press
appears in the display. An automatic function of
pre-setting is activated.
4.4

Auto mode

Automatic mode.
AUTO
To set the AUTO mode, press
appears on the display.
In AUTO mode the run mode will be set
automatically according to the room temperature.
20 / 120 EN
appears on
until
MODE
MODE until
until
MODE
4.5

Heating mode

The heating function allows the air
HEAT
conditioner to heat the room.
To activate the heating function (HEAT), press the
MODE button until the symbol
display.
With the button or set a temperature higher
than that of the room.
Warning:
• In HEATING operation, the
appliance can automatically
activate a defrost cycle, which
is essential to clean the frost
A
on the condenser so as to
recover its heat exchange
function. This procedure
usually lasts for 2-10 minutes.
During defrosting, indoor
unit fan stop operation. After
defrosting, it resumes to
HEATING mode automatically.
Split type air conditioner / User Manual
appears on the