Table of Contents
Advertisement
4 Select a distance for the completed drill. Distance
increments are based on the pool size
selected for the activity profile.
5 Select an option:
• To start another drill interval, press LAP.
• To start a swim interval, press UP or DOWN to
return to the swim training screens.
Golfing
NOTE: If you found a golf course with data that's
inaccurate or outdated, please send us a report at
Issue
Report.
Playing Golf
Before you play golf, you should charge the device
(Charging the Device, page
1 From the watch face, press
2 Select Golf.
3 Go outside, and wait while the device locates
satellites.
4 Select a course from the list of available courses.
5 If necessary, set your driver distance.
6 Select Yes to keep score.
7 Select a tee box.
8 After you complete your round, press
End Round.
Hole Information
The device shows the current hole you are playing, and
automatically transitions when you move to a new hole.
NOTE: Because pin locations change, the device calculates
the distance to the front, middle, and back of the green, but
not the actual pin location.
Current hole number
1
2
Distance to the back of the green
Distance to the middle of the green
3
Distance to the front of the green
4
Par for the hole
5
Map of the green
6
Driver distance from the tee box
7
Big Numbers Mode
You can change the size of the numbers on the hole
information screen.
Activities and Apps
Golf Course
2).
.
, and select
Hold MENU, select the activity settings, and select Big
Numbers.
The distance to the back of the green
1
The distance to the middle of the green or
2
selected pin position
The distance to the front of the green
3
The current hole number
4
The par for the current hole
5
Measuring Distance with Button Targeting
From the hole information screen, you can use the button
targeting feature to measure the distance to a point on the
map.
1 Press UP or DOWN to measure the distance to the
target.
2 If necessary, select
Changing Holes
You can change holes manually from the hole view
screen.
1 While playing golf, press
2 Select Change Hole.
3 Select a hole.
Moving the Flag
You can take a closer look at the green and move the pin
location.
1 From the hole information screen, press
2 Select Move Flag.
3 Press UP or DOWN to move the pin position.
4 Press
.
The distances on the hole information screen are
updated to show the new pin location. The pin location
is saved for only the current round.
Viewing Measured Shots
Before the device can automatically detect and
measure shots, you must enable scoring.
Your device features automatic shot detection and recording.
Each time you take a shot along the fairway, the device
records your shot distance so you can view it later.
TIP: Automatic shot detection works best when you wear
the device on your leading wrist and make good contact
with the ball. Putts are not detected.
or
to zoom in or out.
.
.
7
Advertisement
Table of Contents
