Table of Contents
Advertisement
Navigating to the Starting Point of a Saved
Activity
You can navigate back to the starting point of a saved
activity in a straight line or along the path you traveled. This
feature is available only for activities that use GPS.
1 From the watch face, press
2 Select an activity.
3 Hold MENU.
4 Select Navigation > Activities.
5 Select an activity.
6 Select Back to Start, and select an option:
• To navigate back to the starting point of your
activity along the path you traveled, select
TracBack.
• If you do not have a supported map or are using direct
routing, select Route to navigate back to the starting
point of your activity in a straight line.
• If you are not using direct routing, select Route to
navigate back to the starting point of your activity
using turn-by-turn directions.
Turn-by-turn directions help you navigate to the starting
point of your last saved activity if you have a supported
map or are using direct routing. A line appears on the
map from your current location to the starting point of
the last saved activity if you are not using direct routing.
NOTE: You can start the timer to prevent the device
from timing out to watch mode.
7
Press DOWN to view the compass (optional).
The arrow points toward your starting point.
Stopping Navigation
1 During an activity, hold MENU.
2 Select Stop Navigation.
Map
Your device comes preloaded with maps and can display
several types of Garmin map data, including topographical
contours, nearby points of interest, ski resort maps, and
golf courses.
To purchase additional map data and view compatibility
information, go to
Garmin.com/en-SG/
represents your location on the map. When you are
navigating to a destination, your route is marked with a line
on the map.
Viewing the Map
1 Start an outdoor activity.
2 Press UP or DOWN to scroll to the map screen.
3 Hold MENU, and select an option:
• To pan or zoom the map, select Pan/Zoom.
TIP: You can press
Navigation
.
maps/updates..
to toggle between panning
up and down, panning left and right, or zooming. You
can hold
to select the point indicated by the
crosshairs.
• To see nearby points of interest and waypoints, select
Around Me.
Saving or Navigating to a Location on the Map
can select any location on the map. You can save the
location or start navigating to it.
1 From the map, hold MENU.
2 Select Pan/Zoom.
Controls and crosshairs appear on the map.
3 Pan and zoom the map to center the location in the
crosshairs.
4 Hold
to select the point indicated by the
crosshairs.
5 If necessary, select a nearby point of interest.
6 Select an option:
• To start navigating to the location, select Go.
• To save the location, select Save Location.
• To view information about the location, select
Review.
Navigating with the Around Me Feature
You can use the around me feature to navigate to
nearby points of interest and waypoints.
NOTE: The map data installed on your device must
include points of interest to navigate to them.
1 From the map, hold MENU.
2 Select Around Me.
Icons indicating points of interest and waypoints
appear on the map.
3 Press UP or DOWN to highlight a section of the
map.
4 Press
.
A list of points of interest and waypoints in the
highlighted map section appear.
5 Select a location.
6 Select an option:
• To start navigating to the location, select Go.
• To view the location on the map, select Map.
• To save the location, select Save Location.
• To view information about the location, select
Review.
You
35
Advertisement
Table of Contents
