Table of Contents
Advertisement
Creating and Following a Course on Your
Device
1 From the watch face, press
2 Select an activity.
3 Hold MENU.
4 Select Navigation > Courses > Create New.
5 Enter a name for the course, and select
6 Select Add Location.
7 Select an option.
8 If necessary, repeat steps 6 and 7.
9 Select Done > Do Course.
Navigation information appears.
10 Press
to begin navigation.
Creating a Round-Trip Course
The device can create a round-trip course based on a
specified distance and direction of navigation.
1 From the watch face, press
2 Select Run or Bike.
3 Hold MENU.
4 Select Navigation > Round-Trip Course.
5 Enter the total distance for the course.
6 Select a direction heading.
The device creates up to three courses. You can press
DOWN to view the courses.
7 Press
to select a course.
8 Select an option:
• To begin navigation, select Go.
• To view the course on the map and pan or zoom the
map, select Map.
• To view a list of turns in the course, select Turn By
Turn.
• To view an elevation plot of the course, select
Elevation Plot.
• To save the course, select Save.
• To view a list of ascents in the course, select
View Climbs.
Marking and Starting Navigation to a Man
Overboard Location
You can save a man overboard (MOB) location, and
automatically start navigation back to it.
TIP: You can customize the hold function of the keys to
access the MOB function
47).
1 From the watch face, press
2 Select an activity.
3 Hold MENU.
4 Select Navigation > Last MOB.
Navigation information appears.
34
.
.
.
(Customizing the Hot Keys, page
.
Navigating with Sight 'N Go
You can point the device at an object in the distance, such
as a water tower, lock in the direction, and then navigate to
the object.
1 From the watch face, press
2 Select an activity.
3 Hold MENU.
4 Select Navigation > Sight 'N Go.
5 Point the top of the watch at an object, and press
.
Navigation information appears.
6 Press
to begin navigation.
Navigating to Your Starting Point During an
Activity
You can navigate back to the starting point of your current
activity in a straight line or along the path you traveled. This
feature is available only for activities that use GPS.
1 During an activity, press
2 Select Back to Start, and select an option:
• To navigate back to the starting point of your
activity along the path you traveled, select
TracBack.
• If you do not have a supported map or are using direct
routing, select Route to navigate back to the starting
point of your activity in a straight line.
• If you are not using direct routing, select Route to
navigate back to the starting point of your activity
using turn-by-turn directions.
Your current location
your destination
3
Viewing Route Directions
You can view a list of turn-by-turn directions for your
route.
1 While navigating a route, hold MENU.
2 Select Turn By Turn.
A list of turn-by-turn directions appears.
3 Press DOWN to view additional directions.
.
.
, the track to follow
1
appear on the map.
Navigation
, and
2
Advertisement
Table of Contents
