Table of Contents
Advertisement
If you bought a new smartphone, remove your
device from the Garmin Connect app on the
smartphone you intend to stop using.
Bring your smartphone within 10 m (33 ft.) of the
device.
On your smartphone, open the Garmin Connect app,
select
or
Add Device to enter pairing mode.
From the watch face, hold MENU, and select Phone
> Pair Phone.
Can I use my Bluetooth sensor with my watch?
The device is compatible with some Bluetooth sensors.
The first time you connect a sensor to your Garmin device,
you must pair the device and sensor. After they are paired,
the device connects to the sensor automatically when you
start an activity and the sensor is active and within range.
1 Hold MENU.
2 Select Sensors & Accessories > Add New.
3 Select an option:
• Select Search All Sensors.
• Select your sensor type.
You can customize the optional data fields
(Customizing the Data Screens, page
My headphones will not connect to the device
If your headphones were previously connected to your
smartphone using Bluetooth technology, they may connect
to your smartphone before connecting to your device. You
can try these tips.
Turn off Bluetooth technology on your smartphone. Refer
to the owner's manual for your smartphone
for more information.
Stay 10 m (33 ft.) away from your smartphone
while connecting headphones to your device.
Pair your headphones with your device
Bluetooth Headphones, page
My music cuts out or my headphones do not
stay connected
When using a fē nix device connected to headphones using
Bluetooth technology, the signal is strongest when there is a
direct line of sight between the device and the antenna on
the headphones.
If the signal passes through your body, you may
experience signal loss or your headphones may
become disconnected.
It is recommended to wear your headphones with the
antenna on the same side of your body as your fe ̄ nix
device.
Restarting Your Device
1 Hold LIGHT until the device turns off.
Troubleshooting
, and select Garmin Devices >
38).
(Connecting
16).
2 Hold LIGHT to turn on the device.
Resetting All Default Settings
You can reset all of the device settings to the factory default
values.
1 Hold MENU.
2 Select System > Reset.
3 Select an option:
• To reset all of the device settings to the factory
default values and save all user-entered information
and activity history, select Reset Default Settings.
• To delete all activities from the history, select
Delete All Activities.
• To reset all distance and time totals, select
Reset Totals.
• To reset all of the device settings to the factory
default values and delete all user-entered
information and activity history, select Delete Data
and Reset Settings.
NOTE: If you have set up a Garmin Pay wallet, this
option deletes the wallet from your device. If you
have music stored on your device, this option
deletes your stored music.
Acquiring Satellite Signals
The device may need a clear view of the sky to acquire
satellite signals. The time and date are set automatically
based on the GPS position.
TIP: For more information about GPS, go
sg/about-gps.
1 Go outdoors to an open area.
The front of the device should be oriented toward the
sky.
2 Wait while the device locates satellites.
It may take 30–60 seconds to locate satellite
signals.
Improving GPS Satellite Reception
Frequently sync the device to your Garmin Connect
account:
• Connect your device to a computer using the USB
cable and the Garmin Express application.
• Sync your device to the Garmin Connect app
using your Bluetooth enabled smartphone.
• Connect your device to your Garmin Connect
account using a Wi-Fi wireless network.
While connected to your Garmin Connect account, the
device downloads several days of satellite data,
allowing it to quickly locate satellite signals.
Take your device outside to an open area away from
tall buildings and trees.
Remain stationary for a few minutes.
The temperature reading is not accurate
Your body temperature affects the temperature
Garmin.com.
51
Advertisement
Table of Contents
