Advertisement
Assembly Instructions
Step 21
Fit the 2 overbalance
protector kits
To prevent possible
overbalancing this unit
must be secured to a
suitable wall by fitting of
the 2 overbalance
protector kits
, 1 at
O
each side the unit.
Wall fixings are not
supplied as they will
need to suit the wall
type.
Note: Take care when
drilling the wall that you
do not drill into any
pipes, wires etc.
If in doubt, consult an
expert.
13
In order to prevent overturning
this product must be used with the
2 wall attachment devices provided
Attach the
strap to the wall
Wall fixing
O
(not supplied)
Washer
Screw
(not supplied)
See the next page for a guide
to wall mounting and fixings
WARNING!
Example
Strap
Strap
Attach the
strap to the unit
O
Washer
Washer
Screw
Advertisement
