Safety and Care Advice Important - Please read these instructions fully before starting assembly • Warning: This unit weighs • Make sure you have enough • We do not approximately 24kgs. Please lift space to layout the parts before recommend the with care.
Page 3
If you have damaged or missing components, call the Components - Panels Customer Helpline: 08456 400800 quoting the reference numbers below Please check you have all the panels listed below Left Side Right Side Bookcase End (D2785A) (D2786A) (D2787A) (706 x 353mm) (706 x 353mm) (706 x 186mm) Shelf...
Page 4
If you have damaged or missing components, call the Components - Fittings Customer Helpline: 08456 400800 quoting the reference numbers below Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.
Page 5
If you have damaged or missing components, call the Assembly Instructions Customer Helpline: 08456 400800 quoting the reference numbers below Step 1 Prepare the 3 drawer fronts Screw 2 metal dowels into each of the drawer fronts Note: Tighten the metal dowels up fully against the panels.
Page 6
Assembly Instructions Step 4 Fit the drawer base Slide the drawer base down the grooves in the drawer sides and down into the groove in the drawer front Step 5 Fit the drawer back Fit the drawer back between the drawer sides Make sure that the drawer base...
Page 7
Assembly Instructions Step 8 Prepare the left side Place 3 runners the left side shown. Slide back the top of runner and use the 2nd hole from the front Finished to fit the 1st screw front edge Slide the runner back the other way and fit the 2nd screw into...
Page 8
Assembly Instructions Step 9 Prepare the right side Place 3 runners the right side shown. Slide back the top of runner and use the 2nd hole from the front to fit the 1st screw Slide the runner back the other way and Finished fit the 2nd screw into...
Page 9
Assembly Instructions Step 11 Fit the plinth and the rail to the right side Push the plinth onto the right side Note: Support the rail secure it with screw until the left side has been Push the rail onto the fitted in the next step.
Page 10
Assembly Instructions Step 14 The measurement from top corner X to bottom corner X must be equal to the measurement from top corner Y to bottom corner Y Fit the back Square up the unit by making sure that measurement x to x equals y to y.
Page 11
Assembly Instructions Step 16 inside Fit the shelves to the surface bookcase ends Attach the 3 shelves to the bookcase ends p l a using 12 screws c h i s u r p l a f a c c h i s u r p l a f a c...
Page 12
Assembly Instructions Step 18 Choose desk layout Before going onto the next step, decide which way around you would like your desk to be. Place the 2 assemblies where the desk will be used, so that the unit Drawers on the left does not have to be moved once the top panel has been secured...
Page 13
Assembly Instructions Step 20 Fit the top Lift the top and push the 8 metal dowels fitted to the top down into the holes in the top edge of the sides and bookcase ends Use a screwdriver to tighten the 8 large locking nuts fitted to the sides and bookcase...
Page 14
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800 and quote the reference numbers on the component pages. Argos Ltd, 489-499 Avebury Boulevard, Central Milton Keynes, MK9 2NW...