Page 1
New Sywell - 3+3 Drawer Chest Assembly Instructions - 282/7920 Please keep for future reference 278/1406 287/0049 275/7375 Dimensions Width - 98.5cm Depth - 40cm MADE IN Height - 55.5cm BRITAIN Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800 Issue 2 - 08/04/14...
Safety and Care Advice Important - Please read these instructions fully before starting assembly • Warning: This unit weighs • Make sure you have enough • We do not approximately 28.5kgs. space to layout the parts before recommend the Please lift with care. starting.
Page 3
If you have damaged or missing components, call the Components - Panels Customer Helpline: 08456 400800 quoting the reference numbers below Please check you have all the panels listed below 1 Left Side 2 Right Side Divider (D2547A) (D2548A) (D2565A) (553 x 396mm) (553 x 396mm) (498 x 393mm)
Page 4
If you have damaged or missing components, call the Components - Fittings Customer Helpline: 08456 400800 quoting the reference numbers below Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.
Page 5
If you have damaged or missing components, call the Assembly Instructions Customer Helpline: 08456 400800 quoting the reference numbers below Step 1 Prepare the 6 drawer fronts Screw 2 metal dowels into the holes shown on the back of each drawer front Note: Tighten the metal dowels up fully against...
Page 6
Assembly Instructions Step 4 Fit the drawer base Slide the drawer base down the grooves in the drawer sides and down into the groove in the drawer front Step 5 Fit the drawer back Fit the drawer back down onto the drawer base Make sure that the drawer base...
Page 7
Assembly Instructions Step 8 Prepare the left side Place 3 runners Finished the left side . Slide front edge back the top of the runner and use the 2nd hole from the front to fit the 1st screw Screw 4 metal dowels into the left side Slide the runner back the other way and...
Page 8
Assembly Instructions Step 10 Prepare the top Tap 2 wooden dowels into the top Note: Wooden dowels must not stick out from the edge by more than 10mm or they may damage other panels. Finished front edge Insert 4 large locking nuts into the Note: The arrow on the...
Page 9
Assembly Instructions Step 12 Prepare the divider Place 3 runners Finished the divider . Slide front edge back the top of the runner and use the 2nd hole from the front to fit the 1st screw Insert 2 large locking nuts into the divider Tap a wooden dowel...
Page 10
Assembly Instructions Step 13 Fit the divider Push the divider onto the top Use a screwdriver to tighten the 2 large locking nuts fitted to the divider Finished front edge Step 14 Prepare the 2 rails Tap 2 wooden dowels into each of the 2 rails Insert 2 large locking Finished...
Page 11
Assembly Instructions Step 16 Fit the left side Push the left side onto the assembly. Use a screwdriver to tighten the 4 large locking nuts fitted to the top and rails Finished front edge Step 17 Fit the feet and the plastic nails Screw the feet onto...
Page 12
2nd hole Assembly is complete If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800 and quote the reference numbers on the component pages. Argos Ltd, 489-499 Avebury Boulevard, Central Milton Keynes, MK9 2NW ALR3013...