Table of Contents
Advertisement
INSTRUCTIONS
This chapter is an extract from the DTE 200 and DTE 255 instruction manuals.
SAFETY
Users of ESAB welding equipment have the ultimate responsibility for ensuring that anyone who
works on or near the equipment observes all the relevant safety precautions.
Safety precautions must meet the requirements that apply to this type of welding equipment.
The following recommendations should be observed in addition to the standard regulations that apply
to the work place.
All work must be carried out by trained personnel well familiar with the operation of the welding equip-
ment.
Incorrect operation of the equipment may lead to hazardous situations which can result in injury to the
operator and damage to the equipment.
1.
Anyone who uses the welding equipment must be familiar with:
its operation
S
location of emergency stops
S
its function
S
relevant safety precautions
S
welding
S
2.
The operator must ensure that:
no unauthorized person is stationed within the working area of the equipment when it is
S
started up.
that no--one is unprotected when the arc is struck
S
3.
The work place must:
be suitable for the purpose
S
be free from draughts
S
4.
Personal safety equipment
Always wear recommended personal safety equipment, such as safety glasses, flame--proof
S
clothing, safety gloves.
Do not wear loose--fitting items, such as scarves, bracelets, rings, etc., which could become
S
trapped or cause burns.
5.
General precautions
Make sure the return cable is connected securely.
S
Work on high voltage equipment shall only be carried out by a qualified electrician.
S
Appropriate fire extinquishing equipment must be clearly marked and close at hand.
S
Lubrication and maintenance must not be carried out on the equipment during operation.
S
cdte1de2
- - 68 - -
Advertisement
Table of Contents
