Settings; Volume Control - Lionel 44 Tonner LionChief Locomotive Owner's Manual

Table of Contents

Advertisement

Using the LionChief App

Settings

O
n the setting screen, you will be able to establish key elements of how your locomotive will run
including smoke, momentum and speed limit. These settings will reset once you are done run-
ning the locomotive and close out of your LionChief app.
Smoke On/Off
LionChief Steam,
LionChief Plus and
FlyerChief steam
locomotives come
equipped with a
smoke unit. This but-
ton allows you to turn
on/off your smoke
Smoke On
L
Smoke Off
L
Figure 7. Adjusting locomotive speed and smoke settings

Volume Control

O
ur LionChief ,LionChief Plus and FlyerChief locomotives come equipped with a very impres-
sive RailSounds sound system. This section of the app will allow you to establish the volume for
individual sound elements or the overall sound level.
Note!
Once these are established here, the characteristics will continue both on the app or with
your remote until you choose to change them again.
Pitch
You are able to adjust
the quality of sound
"higher" or "lower" for
both the horn/whistle
and bell.
Figure 8. Adjusting locomotive individual and overall
volume levels
L
Speed Limit
M
H
This setting allows you to control the
max speed the locomotive can go while
you are running your set on the app.
M
H
Exit Screen
M
H
Train Sounds
Diesel revving or steam chuffing
13
Momentum
The setting simulates the gradual
acceleration and stopping of a
real train.

Advertisement

Table of Contents
loading

Table of Contents