Related Manuals for Lionel Building Set
Summary of Contents for Lionel Building Set
- Page 1 72-8066-250 7/01 4-6-2 Pacific Steam Locomotive & Tender Owner’s Manual featuring...
-
Page 2: Table Of Contents
Congratulations! ou own one of the finest and most sophisticated model trains ever built— the Lionel TrainMaster ® Command and Odyssey ™ System-equipped 4-6-2 Pacific. From its hand-applied scale details to the • Powerful Pittman ® motor • R2IR reverse unit for use with the Lionel TrainMaster ®... -
Page 3: Transformer Operations
Transformer operations Running your locomotive with a Lionel transformer Place your locomotive on Lionel or Lionel-compatible O-54 or larger track. • With track power OFF, connect the drawbar between locomotive and tender. That’s all you have to do with Lionel’s new Wireless Tether cation system that eliminates the plugs and wires of the past. -
Page 4: Locking Your Locomotive Into A Single Operational State
Transformer operations Locking your locomotive into a single operational state o select a single operational state for your Lionel locomotive (example: for- ward only), you can deactivate the R2IR’s sequencing function with the Program/Run switch, located on the right hand side, under the locomotive’s cab. -
Page 5: Your Locomotive's Odyssey ™ System Speed Control
Transformer operations Your locomotive’s Odyssey ou can lock your locomotive into speed control mode (ideal for low speed opera- tion) so it will automatically compensate for grades, or to simply maintain a specific speed setting. To turn on the speed control, get your locomotive moving at the desired speed, in forward or reverse. - Page 6 Transformer operations Using your locomotive tender’s ElectroCoupler in the non-Command environment o use your locomotive tender’s Electro- Coupler in the non-Command environ- ment, you must first couple a piece of rolling stock equipped with Lionel magnetic cou- plers directly to your locomotive tender’s rear Magnetic coupler on the rolling stock coupled to the rear of your locomotive tender ElectroCoupler.
-
Page 7: Your Locomotive's Railsounds System-The Basics
Your locomotive’s RailSounds system—the basics ionel RailSounds is the most realistic model railroad sound system in the world. Your locomotive features digital sam- ples from real-life steam locomotives for the ultimate in realism. Begin by installing a 9-volt alkaline bat- tery in the tender. -
Page 8: Experiencing The Range Of Your Locomotive's Railsounds System
Transformer operations Experiencing the range of your locomotive’s RailSounds system ith RailSounds, you experience the sounds of real railroading like never before. Simply put, it’s the most sophisticat- ed, authentic model railroad sound system in the world. And remember—coming from inside your Lionel locomotive’s tender are the authentic sounds of the RailSounds digi- tal sound system. -
Page 9: Installing The Lionel Sound Activation Button
Transformer operations Installing the Lionel Sound Activation Button o operate the bell and whistle sounds when operating your locomotive with conventional transformers, you’ll need to Black wire For AC transformers with a horn/whistle button Red wire Lionel no. 610-5906-001 Sound Activation Button for whistle The no. -
Page 10: Trainmaster Command Operations
TrainMaster Command operations Your locomotive in the TrainMaster Command environment ionel TrainMaster Command is the fun and sophisticated model railroad con- trol system from Lionel. Your locomotive fea- tures the R2IR reverse unit, which acts as both a conventional reverse unit as well as the key to unlocking many extra features when you operate in Command mode. -
Page 11: Cab-1 Commands For Your Locomotive
TrainMaster Command operations Running your locomotive in the TrainMaster Command environment Address Locomotive #1 Example PowerMasters set to CMD or traditional power supplies ON FULL Press ENG Press 1 (the ID#) Throttle up/press any command button CAB-1 commands for your locomotive Locomotive RailSounds effects in bold italic. -
Page 12: Railsounds In The Command Environment
TrainMaster Command operations RailSounds in the Command environment our locomotive’s RailSounds system gives you even more in the TrainMaster Command environment. • DynaChuff . Real steam locomotive chuffing depends on the locomotive’s load. DynaChuff simulates both labored and relaxed chuffing sounds. Highball down the mainline and hear the labored chuffing of a locomotive battling inertia. -
Page 13: Tuning Your Locomotive Performance
TrainMaster Command operations Tuning your locomotive performance MOMENTUM Simulate the labored performance of a locomotive pulling a heavy load with momentum. Press L, M, or H (located under CAB-1’s removable panel) for light, medium or heavy momentum. The R2IR remembers the setting until you change it. -
Page 14: Assigning Your Locomotive A New Id
TrainMaster Command operations Assigning your locomotive a new ID# Assign a new ID# to your Example Command-equipped locomotive Set the locomotive PROGRAM/RUN Switch to PROGRAM (see illustration) Command Base ON Place the locomotive on track PowerMasters set to CMD or traditional power supplies ON FULL Turn track power on (PowerMasters): Press BOOST... -
Page 15: Maintaining Your Locomotive's Handrail Antenna
TrainMaster Command operations Reprogramming R2IR circuit boards to restore features ue to the inevitable derailments, static, and the nature of electricity, it is possi- ble that your R2IR could someday lose its setup program. STEP 1: Move switch on locomotive from RUN to PROGRAM. -
Page 16: Maintaining And Servicing Your Locomotive
Maintaining and servicing your Locomotive Lubricating your locomotive elp your Lionel locomotive lead a long and productive life on your railroad by maintaining it properly. We recommend you purchase a Lionel Lubrication and Maintenance Kit (part no. 6-62927), available from your Lionel dealer. - Page 17 Maintaining and servicing your locomotive Servicing your locomotive’s lamps Before changing the lamps in your locomotive, be sure to check that the AUX2 com- Note! mand was not used to turn off the front headlight. our locomotive is illuminated by four lamps.
- Page 18 Maintaining and servicing your locomotive Tire-Traction™ our locomotive is equipped with Tire- Traction. This means that two of the drive wheels are fitted with rubber traction tires to enhance tractive effort so your loco- motive can pull many cars at once. Lionel has provided extra traction tires to replace the installed traction tires if they Adding fluid to your locomotive smoke generator...
- Page 19 Maintaining and servicing your locomotive Installation of ‘O’ Gauge Coupler Head n ‘O’ gauge coupler (non- operating) is included with your locomotive for those who may wish to “double-head” their trains with a second Pacific or other locomotive. Simply loosen the screw that holds the front coupler.
-
Page 20: Warranty Information
Limited Warranty/Lionel Service his Lionel product, including all mechanical and electrical components, moving parts, motors and structural components, except for light bulbs, is warranted to the original consumer-purchaser, for one year against original defects in materials or workmanship when purchased through an authorized Lionel dealer.