Table of Contents
Advertisement
Using the LionChief App
Troubleshooting
• If the locomotive does not appear in the App's "engine selection carousel, " try turning the track
power off, wait 5 seconds and turn it back on. If that still doesn't work, try restarting the app on
your device.
• If a universal remote is present and powered on, make sure one of its 3 channels is not connecting
to your locomotive before the app is able to connect.
• Make sure that your smart device's Bluetooth is turned on. This is done outside of the LionChief
app.
• If equipped, check the engine' s Bluetooth ON/OFF switch and switch it to the ON position.
• For more Voice Control options, say "help" for a list of basic commands.
Legacy and LionChief Plus 2.0 locomotives can receive commands from both a
Note!
Bluetooth and TMCC controller at the same time.
21
Advertisement
Table of Contents
