Settings; Volume Control - Lionel SD38 Owner's Manual

Using the Bluetooth LionChief App

Settings

O
n the setting screen, you will be able to establish key elements of how your locomotive
will run including smoke, momentum and speed limit. These settings will reset once you
are done running the locomotive and close out of your LionChief app.
Smoke On/Off
This button turns the
smoke unit ON or
OFF on any Bluetooth
equipped Locomotive.
Smoke On
L
Smoke Off
L
Figure 11. Adjusting locomotive speed and smoke settings

Volume Control

O
ur LionChief ,LionChief Plus, FlyerChief, and Legacy locomotives come equipped with
a very impressive RailSounds sound system. This section of the app will allow you to
establish the volume for individual sound elements or the overall sound level.
Note!
Once these are established here, the characteristics will continue both on the app
or with your remote until you choose to change them again.
Pitch
You are able to adjust
the quality of sound
"higher" or "lower"
for both the horn/
whistle and bell.
Figure 12. Adjusting locomotive individual and overall
volume levels
L
M H
Speed Limit
This setting allows you to control the
M H
max speed the locomotive can go while
you are running your set on the app.
Exit Screen
M H
Train Sounds
Diesel revving or steam chuffing
22
Momentum
The setting simulates the gradual
acceleration and stopping of a
real train.