Using the LionChief App
Settings
O
n the setting screen, you will be able to establish key elements of how your locomotive will run
including smoke, momentum and speed limit. These settings will reset once you are done run-
ning the locomotive and close out of your LionChief app.
Smoke On/Off
LionChief, LionChief
Plus and FlyerChief
steam locomotives
come equipped with a
smoke unit. This but-
ton allows you to turn
on/off your smoke
unit.
Smoke On
L
Smoke Off
L
Figure 10. Adjusting locomotive speed and smoke settings
Volume Control
O
ur LionChief ,LionChief Plus and FlyerChief locomotives come equipped with a very impressive
RailSounds sound system. This section of the app will allow you to establish the volume for indi-
vidual sound elements or the overall sound level.
Note!
Once these are established here, the characteristics will continue both on the app or with
your remote until you choose to change them again.
Pitch
You are able to adjust
the quality of sound
"higher" or "lower"
for both the horn/
whistle and bell.
Figure 11. Adjusting locomotive individual and overall
volume levels
L
M
H
Speed Limit
This setting allows you to control the
max speed the locomotive can go while
you are running your set on the app.
M
H
Exit Screen
M
H
Train Sounds
Diesel revving or steam chuffing
15
Momentum
The setting simulates the gradual
acceleration and stopping of a
real train.