Resetting The Locomotive To Factory Settings; Using Another Bluetooth ® Device - Lionel 87-1811020 Owner's Manual

Resetting the locomotive to factory settings

W
ith the remote OFF, hold BELL, DIALOG, HORN button down; then while holding the buttons,
power up the remote. Let go of the 3 buttons. Once the engine connects, it will reset and blow
the whistle at full volume. If the whistle does not blow; redo the sequence.
Using another Bluetooth ® device
Y
our locomotive can also be controlled by another Bluetooth ® device. Only one control device
can be paired with the locomotive at a time. If switching to another device, turn off the LionChief
Remote included with the locomotive. Make sure the TRACK / REMOTE switch on the tender floor is
set for REMOTE. See figure 3 on page 6 for the location of the switch.
This locomotive will also operate with the Lionel Universal Remote (6-83071) available from your
Lionel dealer. This remote can control up to three LionChief locomotives at the same time.
You can also operate the locomotive from any Bluetooth ® equipped smart device with the LionChief
app. To download the app go to www.lionel.com.
Follow the start up instructions for the LionChief remote to pair either of these devices. All will pair
with the locomotive the same way. Remember to turn off the remote after each use to conserve battery
life.
10