Introduction; Validity Of Documentation; Overview Of Documentation - Pilz PSS Series Operating Manual

Introduction

This operating manual is intended to give users all the information they
need to use the PSS SB TESTER.
To fully understand this manual you will need to be conversant with the
information found in the general documentation for the SafetyBUS p PSS-
range. In particular you should read the SafetyBUS p System Description
and SafetyBUS p Installation Manual.
This documentation is intended for instruction and should be retained for
future reference.

Validity of documentation

This documentation is valid for the PSS SB TESTER from Version 2.0.
It is valid until new documentation is published. The latest documentation is
always enclosed with the unit.

Overview of documentation

The manual is divided into the following chapters:
1 Introduction
2 Overview
3 Safety
4 Operation
5 Tests/Measurements
6 Software
Operating Manual: PSS SB TESTER
The introduction is designed to familiarise you with the contents,
structure and specific order of this manual.
This chapter provides a brief overview of the unit's most important
features and its application range.
This chapter must be read as it contains important information on
safety regulations and intended use.
This chapter contains detailed information on how to operate the unit.
This chapter describes the separate tests than can be performed
using the PSS SB TESTER.
This chapter describes the software used to read the test results.
1-1