Software; System Requirements; Installation; Starting The Software - Pilz PSS Series Operating Manual

Software

To transfer the test results from the PSS SB TESTER to a PC you will need
to install the Upload-Software.

System requirements

• Operating system: Windows 98, ME, 2000 or XP
• Hard drive: Approx. 1 MB of available disk space
• USB port

Installation

• Insert the CD into the CD drive.
• Go to the "Upload-Software" directory and call up the file "setup.exe".
• Follow the on-screen instructions.

Starting the software

Open the directory in which you installed the Upload-Software and call up
the file "Results_MT.exe".
Fig. 6-1: Upload-Software
Chapter 4 describes how to upload the test results, in the section entitled
"Uploading the test results to a PC".
Operating Manual: PSS SB TESTER 6-1