Setting The Contrast; Switching The Backlight On/Off - Pilz PSS Series Operating Manual

Setting the contrast

• Press F2 in the "Start" window.
• The "Settings" window opens. Use the arrow keys to move the cursor to
the symbol for "Contrast"
• Now you can use the "left" and "right" arrow keys to increase or reduce
the display's contrast.
• Press VAL to save the setting.
The current setting is saved. A message confirms that the setting has been
saved. The "Settings" window is then displayed again. You can return to
the "Start" window by pressing ESC.
The contrast setting is stored in a memory that is supplied by the battery. If
the battery is removed, the contents of the memory will be retained for 10
minutes. If it takes longer for the battery to be replaced, the contents of the
memory will be lost.

Switching the backlight on/off

• Press F2 in the "Start" window.
• The "Settings" window opens. Use the arrow keys to move the cursor to
the symbol for "Backlight"
• Two symbols will appear.
If you wish to switch the backlight on, use the arrow keys to highlight the
If you wish to switch the backlight off, highlight the
• Press VAL to save the setting.
The current setting is saved. A message confirms that the setting has been
saved. The "Settings" window is then displayed again. You can return to
the "Start" window by pressing ESC.
Operating Manual: PSS SB TESTER
symbol.
and press VAL.
and press VAL.
symbol.
4-3