5.
OPERATING THE ELEVATOR FROM THE CAB CONTROLS
Automatic Operation
1)
Insert the key (if equipped) into the switch in the Cab Operating
Panel. Turn the key to the ON position.
2)
Press a Floor Landing button once and release. The elevator
automatically travels to and stops at the Floor Landing.
3)
Turn the key (if equipped) to the OFF position and remove the key.
If the cab is equipped with a gate, the gate must be closed
after exiting the cab. If the gate is left open, all controls remain
The outside landing door must be closed after exiting or
entering the cab. If the outside landing door is left open, all
NOTE
inoperable.
NOTE
controls remain inoperable.
10 of 14