Operating From The Cab Operating Panel (Cop) Controls - Savaria Infinity Owner's Manual

10

Operating from the Cab Operating Panel (COP) Controls

Automatic Operation
1 If equipped with a key switch, insert the key into the key switch on the Cab
Operating Panel and turn the key to the ON position.
2 Press the selected Landing button once and release. The elevator will
automatically travel to and stop at the selected landing.
3 Release the Landing button when the elevator arrives at the landing.
4 Turn the key (if equipped) to the OFF position and remove the key.
5 Unlock the wheelchair wheels (if applicable) and exit the cab.
Constant Pressure Operation
1 If equipped with a key switch, insert the key into the key switch on the Cab
Operating Panel and turn the key to the ON position.
2 Press and hold the selected Landing button to move the elevator. Maintain
constant pressure until the elevator automatically stops at the desired
landing. To stop the elevator at any point, simply release the Landing
button.
3 Release the Landing button when the elevator arrives at the landing.
4 Turn the key (if equipped) to the OFF position and remove the key.
5 Unlock the wheelchair wheels (if applicable) and exit the cab.
If the cab is equipped with a gate, the gate must be closed after
exiting the cab. If the gate is left open, all controls will remain
inoperable.
An "entry" and "exit" timer allows approximately 9 seconds
before the Hall Call buttons become operational. This delay
allows time for a person to enter/exit the cab.
Infinity & Infinity HD Owner's Manual
NOTE
Part No. 000784, 10-m01-2011