Table of Contents
Advertisement
5.4
Mechanical specifications
Model Number
Dimensions
Optical Filter
Optical Center Accuracy
Material
Lens Mount
Interface Connectors
Camera Mounting
Weight
(*1) Excluding the connectors
5.5
Environmental specifications
Model Number
Operational Temperature / Humidity
Storage Temperature / Humidity
Vibration
Shock
Standard Compliancy
RoHS
(*1) When the internal temperature sensor on camera (value of 2BH command) exceeding +15 deg. C, defective pixels and
noise are appearing increasingly on image. We recommend using this camera under +37 deg. C environmental
temperature or housing temperature at temperature measuring point of camera is not exceeded +47 deg. C condition.
Please insure the camera is installed with appropriate heat dissipation to keep camera housing temperature
(top plate) is less than 69 deg. C when camera using ambient temperature is exceeded 60 deg. C.
If the camera has a mounted lens and a tripod with an aluminum plate, this could decrease camera housing
temperature for heat dissipation.
When attaching camera to lens and aluminum fixture/frame/plate, dissipating camera housing heat efficiently then
camera can be used without increase housing temperature.
When the internal temperature sensor on camera (value of 2BH command) shows less than 36 deg. C, camera
housing temperature (top plate) will be less than 69 deg. C.
Taking these steps will maintain the heat rating of the electronic components of the camera.
Temperature measuring point
STC-LBS132CL-SWIR
Product Specifications and User's
Positional accuracy in Horizontal and Vertical directions: +/- 0.4 mm
Rotational accuracy in Horizontal and Vertical directions: +/- 1.5 deg.
Camera Link connector: SDR connector (3M) or equivalent x 1
Power/IO connector: HR10A-7R-6PB (Hirose) or equivalent x 1
Sixteen M3 screw holes (Four on front, bottom and both side plates)
Four 1/4" Tripod screw holes (One on top, bottom and both side plates)
(camera housing temperature (top plate): less than +69 deg. C (*1))
Environmental humidity: 20 to 85 %RH (No condensation)
Environmental temperature: -25 to +75 deg. C
Environmental humidity: 20 to 85 %RH (No condensation)
20 Hz to 200 Hz to 20 Hz (5 min. / cycle), acceleration 10 G,
Acceleration 38 G, half amplitude 6 msec. XYZ 3 directions 3 times each
Guide0
STC-LBS132CL-SWIR
58 (W) x 58 (H) x 85 (D) mm (*1)
No Optical Filter
Aluminum alloy
C Mount
Approximately 425 g
STC-LBS132CL-SWIR
Environmental temperature: 0 to +60 deg. C
XYZ 3 directions 30 min. each
EMS: EN61000-6-2, EMI: EN61000-6-4
RoHS compliance
No. 22S034-00
11/57
Advertisement
Table of Contents
