Mechanical Specifications; Environmental Specifications - Omron STC-MBA1002POE Product Specifications And User's Manual

5.3

Mechanical Specifications

Model Number
Dimensions
Optical Filter
Optical Center Accuracy
Material
Lens Mount
Interface Connectors
Camera Mounting
Weight
(*1) Excluding the connectors
5.4

Environmental Specifications

Model Number
Operational Minimum
Temperature /
Humidity
Maximum
Storage Temperature / Humidity
Vibration
Shock
Standard Compliancy
RoHS
(*1) Please insure the camera is installed with appropriate heat dissipation. If camera has a mounted lens and a tripod with
an aluminum plate, this could decrease camera housing temperature for heat dissipation. When the internal temperature
sensor on camera shows less than 59 deg. C, camera housing temperature (top plate) will be less than 50 deg. C.
Taking these steps will maintain heat rating of electronic components of camera.
Upper side of camera
Measuring point
STC-MBA1002POE
Product Specifications and User's Guide
29 (W) x 29 (H) x 53 (D) mm (*1)
Positional accuracy in Horizontal and Vertical directions: +/- 0.3 mm
Rotational accuracy of Horizontal and Vertical: +/- 1.5 deg.
Ethernet connector: RJ45 connector
Power/IO connector: HR10A-7R-6PB (Hirose) or equivalent
Six M3 screw holes (Two on top, four on bottom plate)
Environmental Temperature: 0 deg. C,
Environmental Humidity: 0 to 85 %RH (No condensation)
Camera housing temperature (top plate) shall not exceed +50 deg. C (*1)
Environmental Humidity: 0 to 85 %RH (No condensation)
Environmental Temperature: -20 to +70 deg. C,
Environmental Humidity: 0 to 85 %RH (No condensation)
20 Hz to 200 Hz to 20 Hz (5 min. / cycle), acceleration 10 G, XYZ 3 directions, 30 min. each
Acceleration 38 G, half amplitude 6 ms, XYZ 3 directions, 3 times each
EMS: EN61000-6-2, EMI: EN55011
STC-MBA1002POE
No Optical Filter
Aluminum Alloy (AC)
C mount
Approximately 62 g
STC-MBA1002POE
RoHS Compliance
No.19S183-03
13/66