Huawei UPS5000-E-60 kVA User Manual page 124

UPS5000-E-(60 kVA-125 kVA)
User Manual (Integrated UPS 3.0)
Figure 4-13 IP Settings
IP address allocation
●
●
Item
IP address
Subnet mask
Gateway
Issue 04 (2022-12-30)
If the MDU is connected to a computer over a network cable, the IP address
can only be allocated manually. The IP addresses of the MDU and computer
must be on the same network segment, and must be different.
If the MDU is connected to a computer over a LAN switch or router with the
DHCP function, the IP address can be allocated manually or automatically. IP
address allocation is set to Manual by default.
– Manual: Check that the IP addresses of the MDU and computer are on
the same network segment, and are different. Set the UPS IP address to
be in the same subnet as the computer IP address.
– Automatic: The MDU automatically searches for available IP addresses in
the connected network. Ensure that the MDU and computer IP addresses
are on the same network segment.
NO TE
After you restart the device, IP address allocation changes back to Manual. The IP address
is set to the IP address set previously.
Description
Specifies the IP address of the
Ethernet.
NOTICE
Ensure that the UPS IP address
is unique on the network
segment. Otherwise, the LCD
may not work properly.
Specifies the subnet mask of
the Ethernet.
Specifies the Ethernet
gateway.
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 LCD Interface
Default Value Value Range
192.168.0.10 1.0.0.0–
223.255.255.25
5
255.255.255.0 0.0.0.0–
255.255.255.25
5
192.168.0.1 1.0.0.0–
223.255.255.25
5
116