Table of Contents
Advertisement
DMX products must have their own "address" to receive DMX signals.
by flipping the appropriate DMX dip switches.
You need to know that DMX address settings are the sum of the dip switch values.
A standard DMX address for a Showtec LED Par 36, which has four channels is as follow:
Example
LED Par 36
Address Value
Unit 5
17
Switch
Value
#1
1
#5
16 +
Total sum
17
Explanation: Since each unit has four channels, each address advances four values (See Address Value
above).
Once address values are determined, add DMX dip switch values to obtain the appropriate address (DMX
Dip Switches "ON") for each unit. Flip appropriate DMX dip switches on each unit.
DMX Channels
Channel 1 – „R"
Channel 2 – „G"
Channel 3 – „B"
Channel 4 – Full Color
Channel 5 – Strobe and Speed
Channel 6 – Modi
Mode 1 Characteristic
0 - 63 RGB control
DMX Dip Switches "ON"
#1 , #5
Mode 2 Characteristic
64 – 127 7 color fade
Addresses on the controller are set
Mode 3 Characteristic
128 – 191 7 color change
Mode 4 Characteristic
192 – 255 3 color change
7
Advertisement
Table of Contents
