Rigging - SHOWTEC LED Par 36 DMX Manual

Rigging

Please follow the European and national guidelines concerning rigging, trussing and all other safety issues.
Do not attempt the installation yourself !
Always let the installation be carried out by an authorized dealer !
Procedure:
If the LED Par 36 is lowered from the ceiling or high joists, professional trussing systems have to be
•
used.
Use a clamp to mount the LED Par 36, with the mounting-bracket, to the trussing system.
•
The LED Par 36 must never be fixed swinging freely in the room.
•
The installation must always be secured with a safety attachment, e.g. an appropriate safety net or
•
safety-cable.
When rigging, derigging or servicing the LED Par 36, always make sure, that the area below the
•
installation place is blocked and staying in the area is forbidden.
Improper installation can cause serious damage to people and property !
Connection with the mains
Connect the device to the mains with the power-plug.
Always pay attention, that the right color cable is connected to the right place.
Cable Pin
BROWN FASE
BLUE NUL
YELLOW/GREEN EARTH
Make sure that the device is always connected
International
L
N
properly to the earth!
4