Troubleshooting - Titan TTB924DBT Manual

Care and maintenance / Troubleshooting
EN EN
Repair
This machine does not contain any parts that can be repaired by the consumer.
Contact an authorised service centre or a similarly qualified person to have it
checked and repaired.
Storage
1. Switch the machine off and disconnect it from the power supply.
2. Clean the machine as described above.
3. Store the chuck key (21) onto the key holder (17).
4. Store the machine and its accessories in a dark, dry, frost-free, well-ventilated
place.
5. Always store the machine in a place that is inaccessible to children. The ideal
storage temperature is between 10 °C and 30 °C.
6. We recommend using the original package for storage or covering the
machine with a suitable cloth or enclosure to protect it against dust.
Transportation
1. Switch the machine off and disconnect it from the power supply.
2. Remove the machine head (6) from the column (8) and ensure both the drill
table (13) and base (11) are securely fastened.
3. Attach transportation guards, if applicable.
4. Protect the machine from any heavy impact or strong vibrations which may
occur during transportation in vehicles.
5. Secure the machine to prevent it from slipping or falling over, damage and
injury.

Troubleshooting

Suspected malfunctions are often due to causes that the users can fix themselves.
Therefore check the product using this section. In most cases the problem can
be solved quickly.
WARNING! Only perform the steps described within these instructions!
All further inspection, maintenance and repair work must be performed
by an authorised service centre or a similarly qualified specialist if you
cannot solve the problem yourself!
36
MNL_TTB924DBT_350W Drill Press_GB_EU_V1_220421.indd 36 MNL_TTB924DBT_350W Drill Press_GB_EU_V1_220421.indd 36
TTB924DBT by TITAN
2022/4/21 2:54 PM 2022/4/21 2:54 PM