ESAB Caddy 130 Service Manual page 26

ASSEMBLY/DISASSEMBLY
REMOVAL OF REAR PANEL AND CASING
Remove the strap from the rear panel (1).
S
Remove the cable bushing (2) and slide it back along the cable.
S
Remove the two screws (3).
S
Caddy 130/140:
S
Remove the rear panel from the casing (7) and disconnect the wires to the switch (4).
Caddy 200:
Remove switch knob (6) and screws (5). Remove the rear panel from the casing (7).
Pull the casing back, over the rear panel and the mains cable.
S
cmha2de1
Removal of the rear panel and casing
- - 26 - -