Pci/Pnp Setup - DTK PRM-0074I User Manual

Chapter 4

4.6.5 PCI/PnP SETUP

PCI/PnP Setup options are displayed by choosing the PCI/PnP Setup Icon from the
Setup Menu. The standard option is shown on the following screen.
Plug and Play Aware OS: Set this option to Yes if the operating system installed in the computer
is Plug and Play-aware. AMIBIOS only detects and enables PnP ISA adapter cards that are
required for system boot. The Windows 95 operating system detects and enables all other PnP-
aware adapter cards. Windows 95 is PnP-aware. Set this option to No if the operating system
(such as DOS, OS/2, Windows 3.x) does not use PnP. You must set this option correctly or
PnP-aware adapter cards installed in your computer will not be configured properly. The
settings are No or Yes. The Optimal and Fail-Safe default settings are No.
Clear NVRAM on Every Boot: Normally, you leave this option No. Select Yes to reset ESCD
when you exit Setup it you have installed a new add-on and the system reconfiguration has
caused such as serious conflict. The default setting is No.
36
Fig. 23 PCI/PnP Setup Menu