N469Xa/B Options; N4432A And N4433A Series Kit Contents - Agilent Technologies 85091C Reference Manual

Preparing ECal for Use

N4432A and N4433A Series Kit Contents

N469xA/B Options

• Option 00M configures the microwave module with two male connectors.
• Option 00F configures the microwave module with two female connectors.
• Option M0F configures the module with one male connector and one female connector.
• Option 00A adds one -m- to -m- and one -f- to -f- adapter (not supplied with N4696B).
• Option UK6 adds a commercial calibration certificate with measured data.
• Option 150 adds a storage box for the ECal module and accessories.
N4432A and N4433A Series Kit Contents
The following tables list the items in each N4432A and N4433A kit. For the N4432A kit,
Option 020 is configured with type-N 50 ohm -f- connectors on all ports. For the N4433A it,
Option 010 is configured with 3.5 mm -f- connectors on all ports. See
page 1-12 and Table 1-10 on page 1-12
Table 2-5 N4432A Kit Contents
Qty Description
N4432A Option 020
1 Microwave Module, Type-N
50 Ohm -f-
1 Torque Wrench 3/4", 1.3 N-m
1 USB A-B Cable, 1.8 m
1 Reference Guide
- N/A
Table 2-6 N4433A Kit Contents
Qty Description
N4433A Option 010
1 Microwave Module, 3.5 mm -f- N4433-60003
1 Torque Wrench 20 mm, 0.9 N-m 8710-1764
1 Torque Wrench 5/16", 0.9 N-m
1 USB A-B Cable, 1.8 m
1 Reference Guide
2-6
for other configurations available.
Part No.
N4432-60003
8710-1766
8121-0506
N4693-90001
-
Part No.
8710-1765
8121-0506
N4693-90001
Table 1-9 on
Chapter 2