Table of Contents
Advertisement
Handling and Storage
• Use the plastic end caps and store the calibration devices in the foam-lined storage case
when not in use.
• Never store connectors loose in a box, in a desk, or in a bench drawer. This is the most
common cause of connector damage during storage. Agilent recommends that you
purchase the optional ECal Storage Box (not included with an ECal kit). This is an
container fro securing your ECal module and accessories, such as a USB cable,
wrenches, and adaptors. For ordering information, see
page
6-11.
• Keep connectors clean.
• Do not touch mating plane surfaces. Natural skin oils and microscopic particles of dirt
are easily transferred to a connector interface and are very difficult to remove.
• Do not set connectors contact-end down on a hard surface. The plating and the mating
plane surfaces can be damaged if the interface comes in contact with any hard surface.
Chapter 4
Use, Maintenance, and Care of the Devices
Handling and Storage
"Other ECal Accessories" on
4-19
Advertisement
Table of Contents
